SUMMER SPECIAL

PRICES SHARPLY REDUCED

GET A UNIVERSAL TOOL TROLLEY FOR YOUR SHOP

 

 

 

 

 

 

 

 

 

Tool Trolley Trademark and Logo

Universal Tool Trolley Precision Cutting System

800-524-1138                   www.tooltrolley.com

 

Using a Router with a Universal Tool Trolley

 

Router Trolley Mounting Plate

The Universal Tool Trolley with router attached is extremely versatile, going beyond the conventional cutting of dados, rabbets, and shaped edges. The Universal Tool Trolley provides for fine control of your router enabling the accomplishment of many woodworking operations. 

The Universal Tool Trolley will accept all sizes of routers. When used with the Tool Trolley workbench or Shuttles made from scrap materials, the Universal Tool Trolley can easily perform the following operation and a lot more.  All these operations can be seen in live action on our Tool Trolley Video Web page.

   

Raised Panels

 
Router trolley cutting the edge of the workpiece

Cutting raised panels

 

 

 

Cutting a Raised Panel

Vertical Raised Panel Bit

Finished raised panels
 

Finished Results

 
   

The Sliding Dovetail Joint

 
Set up for cutting sliding dovetail joints
Finished dovetail on edge of board  

Lamp Stand Sides Clamped Vertically For Cutting Male End Of Dovetail Joint

 
Close up of dovetail joint
 

Lamp Table Assembled Entirely Using Sliding Dovetail Joints

 
     

Mortise& Tenon Joints

 
Miter cut on edge of stile Dry fitting mortise and tenon joint  

Miter cut on edge using Circular Saw Trolley

Mortise & Tenon cut using Converter Router Trolley

Groove cut on edge of board
 

Shape & Groove cut on edge with the Router Trolley

 
   

Edge Jointing using the Universal Tool Trolley with Router Attached

 
Edge jointing edge of lumber
Saw blade marks before jointing  

Edge Jointing

Saw Cut Marks

Finished cut smooth

 

Router Cut is Clean

 
   

Use Shuttles as a Work Platform Simplifying Joint Construction

 

Cutting a  mortise with the router trolley on a shuttle

Miter Shuttle  

Cutting a Mortise using a Mortise Shuttle

Cutting Miters on edge of Door Stile

 
Miter Cuts Completed  

The Start of a Mitered Stile & Rail Joint

 
   

Shuttle Facilitates Cutting dados on End of Boards to Recess an Attachment Bracket

 
Click HERE to see how to make a shuttle  
Jig for cutting dado on end of board
Cutting dado on end of board

Bed Rail Held in Vice

Shuttle Attached to end of rail

 

Finished dados
 

Finished dados on ends

 
   

Rabbets & Dados

 
Rabbet cut
cutting Tenons

Simple Rabbet Cut

Routing tenons on ten door rails Simultaneously

Cutting dados in workbench top
 

Cutting dados on the underside of a Melamine workbench top in which the apron will be recessed and glued

 
   

Cutting & Shaping

 
Cutting & Shaping a workpiece
Cutting table top to size
Cutting to Width with Circular Saw Finishing the Edge with Router  
Close-up of router shaping the edge
 
 

Go To Top Of  Page